1925 6c Garfield, orange, perf 10
# 587 PB - 1925 6c Garfield, orange, perf 10
$150.00 - $275.00
| Image | Condition | Price | Qty | |
|---|---|---|---|---|
|
Mint Plate Block
Usually ships within 30 days.
Usually ships within 30 days.
$ 275.00
|
$ 275.00 |
|
|
|
Unused Plate Block
small flaws
Ships in 1-3 business days.
Ships in 1-3 business days.
$ 150.00
|
$ 150.00 |
|
Mounts - Click Here
| Mount | Price | Qty |
|---|
U.S. #587
Series of 1923-26 6¢ James Garfield
Series of 1923-26 6¢ James Garfield
Issue Date: April 4, 1925
First City: Washington, D.C.
Quantity Issued: 262,434,000
Printed by: Bureau of Engraving and Printing
Printing Method: Rotary Press
Perforation: 10
Color: Red orange
First City: Washington, D.C.
Quantity Issued: 262,434,000
Printed by: Bureau of Engraving and Printing
Printing Method: Rotary Press
Perforation: 10
Color: Red orange
The portrait of James A. Garfield on this stamp came from an artotype (an early kind of photograph) taken by Edward Bierstadt. (Edward’s brother, Albert, was a famous painter who was later honored on U.S. #4346.) Few photographs were taken of Garfield, as he was shot by an upset office-seeker just four months into his term in office. He died 80 days later, on September 19, 1881.
Rotary Presses Lead to Faster, Cheaper Production
Prior to 1923, the rotary press had been used in the production of coil stamps. It soon became apparent this was the fastest and most economical means of printing stamps. The rotary press could print 1000 stamps at a cost of .053 cents, compared to the conventional flat bed press cost of .08 cents. This difference of .027 cents is significant when one takes into consideration the fact that the Bureau printed millions of stamps each day.
Daily production rates jumped from 1,600,000 stamps on the flat bed press to 6,000,000 per day on the rotary press. Despite the increased production and lower costs, the Post Office Department was still skeptical. They finally decided a few stamps should be printed experimentally. At first, only the 1¢ Franklin was produced and used on a trial basis for six months.
The results were successful, proving that quality was not sacrificed for higher production. Shortly thereafter, the 2¢ Washington was produced on rotary presses as well. Eventually, new equipment was developed to improve the process, which resulted in the 1¢ through 10¢ being printed on the rotary press.
U.S. #587
Series of 1923-26 6¢ James Garfield
Series of 1923-26 6¢ James Garfield
Issue Date: April 4, 1925
First City: Washington, D.C.
Quantity Issued: 262,434,000
Printed by: Bureau of Engraving and Printing
Printing Method: Rotary Press
Perforation: 10
Color: Red orange
First City: Washington, D.C.
Quantity Issued: 262,434,000
Printed by: Bureau of Engraving and Printing
Printing Method: Rotary Press
Perforation: 10
Color: Red orange
The portrait of James A. Garfield on this stamp came from an artotype (an early kind of photograph) taken by Edward Bierstadt. (Edward’s brother, Albert, was a famous painter who was later honored on U.S. #4346.) Few photographs were taken of Garfield, as he was shot by an upset office-seeker just four months into his term in office. He died 80 days later, on September 19, 1881.
Rotary Presses Lead to Faster, Cheaper Production
Prior to 1923, the rotary press had been used in the production of coil stamps. It soon became apparent this was the fastest and most economical means of printing stamps. The rotary press could print 1000 stamps at a cost of .053 cents, compared to the conventional flat bed press cost of .08 cents. This difference of .027 cents is significant when one takes into consideration the fact that the Bureau printed millions of stamps each day.
Daily production rates jumped from 1,600,000 stamps on the flat bed press to 6,000,000 per day on the rotary press. Despite the increased production and lower costs, the Post Office Department was still skeptical. They finally decided a few stamps should be printed experimentally. At first, only the 1¢ Franklin was produced and used on a trial basis for six months.
The results were successful, proving that quality was not sacrificed for higher production. Shortly thereafter, the 2¢ Washington was produced on rotary presses as well. Eventually, new equipment was developed to improve the process, which resulted in the 1¢ through 10¢ being printed on the rotary press.